+86 130 7366 6093

100 Watt LED Street Light

100 watt LED street light with aluminum die-casting housing, high transmittance PC optical lens TYPE II Medium, high-efficiency Philips LEDs, high-end Meanwell LED Driver, IP66 waterproof, Impact resistance IK10, high cost-effective, Factory Direct price, free lighting design.

Key features

100 watt led street light

Wide power range: 60W~130W.

Special circuit design, single LED damage won't affect others' normal work.

Smart design, low transportation costs.

Toolless open for easy installation, replacement, and maintenance.

The LED engine, consisting of the LED light source and the power supply, can be easily replaced or upgraded. Designed for easy technology upgrade (Future Proof)

Electronic temperature monitoring prevents overheating of LEDs and power supply.

Provided with 10KV Surge Protection Devices.

Corrosion-resistant polyester powder painted 100µm in thickness.

Meets a 1000-hour salt spray certification per ASTM B117/ ISO 9227:2012.

Optimized roadway photometric distributions, ULOR = 0 (zero uplight)

Supports Smart City application,7-Pin NEMA socket, and standard outdoor dimming protocols.

e.g. photocell, motion sensor, DALI, 1-10V.

High Lumen output up to 160lm/w with high-quality LED chips.

Designed to last at least 100, 000 hours at L70.

ENEC/ CB/ CE/ RoHS/ IK10 /IP66 /LM79

5 years limited warranty available.



Street, highway, park lot, roadway, path and etc


Led street light 100w

Driver BrandMeanwell  / Inventronics
Normal Wattage100W
LED Chip Quantity3030: 160pcs 
Input Voltage100-240/277VAC
Power Efficiency>90%
Power Factor>0.95
Lamp Rated Luminous Efficiency146 lm /w
Lamp Rated Lumen output14600lm (Lumen tolerance +/- 5%)
Color Rendering Index70(80 optional)
Color Temperature3000  or 4000 or 5000 or 5700K
Photometric TypeTypeII Medium
Optimal Operating Temperature25℃
Storage Temperatures-40°C~50°C
Working EnvironmentBetween-40°C~+50°C,   10%~90%RH
Total Harmonic Distortion<10%
Lumen Maintenance>100,000 hours -L70, @25 ºC (77 ºF)
Wind IndexForce  12
Body and Shell MaterialsDie-cast aluminum; PC Lens
Pole Fitter Diameter60mm ( 50mm optional)
RatingIP66  IK10
Protection Class  I
SPD10KV (20KV optional)
CertificationCE,  ENEC,CB ROHS,LM80,LM79,IP66 IK10,ISTMT
Dimming Options1-10V 
Control OptionsPhotocell or Smart control
Color OptionsDeep grey
Warranty5  years



  1.  What is LED street light?

    LED street lights (also known as light-emitting diodes or LEDs) are a kind of semiconductor illumination. It is a high-efficiency solid-state light source based on a PN junction semiconductor that emits light with very little electrical energy. The holes injected into the P region and the electrons injected into the N region are dispersed to After radiation recombines the active region to produce photons, the electrical energy is transferred directly to light energy. It is a solid-state cold light source that is environmentally friendly, produces no pollution, consumes little power, produces high light efficiency, and has a long life. As a result, LED street lights will become the ideal option for energy-efficient road lighting retrofits.

  2. What is the importance of street lights?

    Street lights are lamps that illuminate roadways and are often used to refer to lamps that fall within the spectrum of road lighting in traffic lighting. Street lights are frequently employed in a variety of locations that need illumination. Fire is the narrative of human progress and an entrepreneur's quest for illumination. The adoption of fire represents a watershed moment in the evolution of human civilization. The first lights were created by ancient people's bonfires.

    Road lights are mostly used on roadways to provide illumination for pedestrians and cars driving at night. It must need road lights to cooperate with the light in order for practical usage to be possible, but the light source must be lighted and have a long life. The life span may be extended indefinitely to suit human needs. Utilize light energy sparingly in order to minimize glare. Its light should be reflected at the required angle, and it should fall on the pavement in the defined pattern. The light is uniformly distributed, the pavement is bright, and the glare is minimal. Light distribution control may be used above the maximum light intensity to minimize glare.

    Road lights may be set symmetrically on both sides of the road, interlaced on both sides, on one side, or in the middle of the road, depending on the road section, width, vehicle, and pedestrian circumstances. In general, highways wider than 20 meters and inviting roads may be deemed symmetrically laid out on both sides; roads wider than 15 meters can be interlaced, and smaller roads can be laid out on one side. Energy conservation, reduced carbon emissions, and environmental preservation are the primary paths for future growth. Additionally, road lights may alter people's moods, increase their emotions, and alter their perceptions, producing a palette-like night.

    During the day, courtyard lights can enhance the cityscape; at night, courtyard lights not only provide necessary lighting and convenience but also enhance residents' sense of security, while also highlighting the city's highlights and interpreting the bright style, which is still used today and has developed into a mature industrial chain. European-style garden lights are classified according to their design styles, which are influenced by European art components and abstract expression forms. For instance: Crown courtyard lighting. Contemporary courtyard lamp: its design style is characterized by the use of modern art elements, which are represented in a straightforward way, such as spring bloom garden lights. Traditional courtyard lights: The majority of their designs include and alter Chinese classical motifs, such as palace lights. Street lights provide powerful light effects and excellent color rendering capability to withstand routine operation in very cold temperatures. Different street lights have a variety of styles to complement the architecture of urban structures and the way they are used.

The Sales Team You Can’t Resist

The Sales Team You Can’t Resist

24/7 Online Support

Every inquiry will be replied within 2 hours or less

Pre-sale LED lighting consultation

Professional Technical Support

Order following-up

Quick after-sale service

Our Clients Say

  • These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied

    David, Lights Contractor

    David, Lights Contractor


  • I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.

    Kevin, Amazon LED trading

    Kevin, Amazon LED trading


  • They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.

    Pablo, LED distributor

    Pablo, LED distributor


  • Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!

    Ravinder, Owner

    Ravinder, Owner



Please leave us a message and we will get back to you within 12 hours.

Wechat Skype WhatsApp