150W EESL street light for sale, it adopts smooth lamp body, not easy to dust, toolless buckle, easy to open the luminaire, high transparent glass reach IK10, knife Switch, respirator, programmable LED driver, 10 kinds of light distribution for optional, support horizontal and vertical mounted to meet all bidding requirements.
Wide power range: 20W~240W
Luminaire efficacy: Up to 170 lm /w
70% energy saving, short ROI period
Up to 100, 000hrs @ L70, low maintenance cost
World-class, approbated quality components (LEDs /Driver /etc.)
Tool-less opening of driver box, ease of maintenance
Support horizontal and vertical mounted, suitable for different light poles
High-pressure die-cast aluminum and Tempered glass cover
More than 10 types of light distributions for optional
Power-off protection makes the power automatically off when the fixture is opened.
A smooth body would greatly diminish dust accumulation and bird droppings heap up.
Level bubble makes it easy for the installer to adjust the position of the lamp.
1500 hours salt spray test report.
Local roads, Express roads, Town roads, Residential area roads, Pedestrian crossings, Parking areas
|LED Brand||Lumileds 3030/5050|
|Driver Brand||Meanwell or Inventronics|
|Lamp Rated Luminous Efficiency||145-155 lm/w|
|Lamp Rated Lumen output||21750-23250 lm (Lumen tolerance +/- 5%)|
|Color Rendering Index||70( 80 optional）|
|Color Temperature||3000 or 4000 or 5000 or 5700K|
|Optic (IESNA)||Type II Medium; Type III Medium|
|Optimal Operating Temperature||25°|
|Working Environment||Between-40°C~+50°C, 10%~90%RH|
|Total Harmonic Distortion||< 10%|
|Lumen Maintenance||> 100000 hours -L70, @25 ºC (77 ºF)|
|Wind Index||Force 12|
|Body||Die-cast aluminum Housing and Tempered glass|
|Pole Fitter Diameter||60mm ( 50mm optional)|
|Protection||Class I ( Class II optional)|
|SPD||10KV (20KV optional)|
|Dimming Options||1-10V or DALI or PWM or Timer|
|Available on request||NEMA socket (3/5/7pins), ZHAGA socket, Short cap, Photocell, Motion sensor, Knife switch, NTC, OLC, Solar Compatible, DALI Dimming|
How much do street light poles cost?
A consumer light pole is far less expensive than a street light pole. The average cost of a street light pole is between $2,000 and $3,000. This does not include installation. The cost of installation varies by city, but the average is roughly $1,000. Installing street light poles is more difficult and takes up more space.
Because there are so many variables that go into the cost of a single light post, it can be difficult for municipalities to predict expenses when a vast area needs to be covered. The street pole's position is also a consideration. Installation of city street light poles is less expensive than installation in difficult-to-reach regions or on specific types of architecture, such as highways or bridges.
Who is responsible for street lights?
Every city is unique in its own way. The City Department of Transportation is in charge of street lighting in various places. In other regions, it might be the city, the county, or a homeowner's association. The city, town, or county may own the street lights and be responsible for their repair and upkeep. However, some institutions, such as the fire department or the Department of Transportation, may play an active role in the upkeep. They're the people you'd call if a street light went out.
How much does a street light cost on a highway or a bridge?
According to most estimates, putting light poles on a highway or bridge might cost up to 20% extra. Because of the difficulties in replacing them, this is the case. These places are frequently difficult to navigate physically, necessitating the closure of streets and traffic detours.
If a street light pole costs $4,000 in total, a similar light on a highway or bridge will set you back $4,800.
The Sales Team You Can’t Resist
24/7 Online Support
Every inquiry will be replied within 2 hours or less
Pre-sale LED lighting consultation
Professional Technical Support
Quick after-sale service
Our Clients Say
These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied
David, Lights Contractor
I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.
Kevin, Amazon LED trading
They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.
Pablo, LED distributor
Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!