+86 130 7366 6093

100w philips led street light price

What is the price of 100w Philips led street light? The price will be different based on configurations. The brand of LEDs and LED driver has a great influence on the price. The SD street light adopts Philips LEDs and Inventronics programmable driver, knife switch, adjustable bracket, IK10, IP66, high performance but with a very competitive price.

Key features

Led street light priceled street light

Wide power range: 60W~130W.

Special circuit design, single LED damage won't affect others' normal work.

Smart design, low transportation costs.

Toolless open for easy installation, replacement, and maintenance.

The LED engine, consisting of the LED light source and the power supply, can be easily replaced or upgraded. Designed for easy technology upgrade (Future Proof)

Electronic temperature monitoring prevents overheating of LEDs and power supply.

Provided with 10KV Surge Protection Devices.

Corrosion-resistant polyester powder painted 100µm thickness.

Meets a 1000-hour salt spray certification per ASTM B117/ ISO 9227:2012.

Optimized roadway photometric distributions, ULOR = 0 (zero uplight)

Supports Smart City application,7-Pin NEMA socket, and standard outdoor dimming protocols.

e.g. photocell, motion sensor, DALI, 1-10V.

High Lumen output up to 160lm/w with high-quality LED chips.

Designed to last at least 100, 000 hours at L70.

ENEC/ CB/ CE/ RoHS/ IK10 /IP66 /LM79

5 years limited warranty available.



Street, highway, park lot, roadway, path and etc


Philips street light price

Driver BrandMeanwell / Inventronics
Normal Wattage110W
LED Chip Quantity3030: 160pcs 
Input Voltage100-240/277VAC
Power Efficiency>90%
Power Factor>0.95
Lamp Rated Luminous Efficiency143 lm /w
Lamp Rated Lumen output15730lm (Lumen tolerance +/- 5%)
Color Rendering Index70(80 optional)
Color Temperature3000 or 4000 or 5000 or 5700K
Photometric TypeTypeII Medium
Optimal Operating Temperature25℃
Storage Temperatures-40°C~50°C
Working EnvironmentBetween-40°C~+50°C,   10%~90%RH
Total Harmonic Distortion<10%
Lumen Maintenance>100,000 hours -L70, @25 ºC (77 ºF)
Wind IndexForce  12
Body and Shell MaterialsDie-cast aluminum; PC Lens
Pole Fitter Diameter60mm ( 50mm optional)
RatingIP66  IK10
Protection Class  I
SPD10KV (20KV optional)
CertificationCE,  ENEC,CB ROHS,LM80,LM79,IP66 IK10,ISTMT
Dimming Options1-10V 
Control OptionsPhotocell or Smart control
Color OptionsDeep grey
Warranty5  years



  1. What is the typical distance between street light poles?

    The fact that there is a prescribed space between light poles may surprise you. Recommendations are made based on the best lighting alternatives. It's surprising because there isn't a standard in many places.

    29 meters is the best distance. This is a precise calculation based on the light pole's height and the area it will illuminate. The measurement is 2 to 3 times the height of the light pole, with 2.5 times being the most common marking. The illumination on the street is more even when the spacing is precise.

    The spacing between lights in most places isn't exact. Some light poles are set 29 meters apart, while others are 50 meters apart. The spacing will typically be determined by the architecture of the street. If there are no houses or businesses in the area, there may be few reasons to light it.

  2. What color temperature are LED street lights?

    The temperature of LED illumination is measured in Kelvins. A "cold" color temperature is usually 4000K or more, whereas a "warm" color temperature is less than 3000K.

  3. How much does it cost to install a street light?

    A street light might cost anything from $2,000 to 3,000 dollars. Depending on the area, a street light installation can cost up to $1,000. However, prices can vary greatly. The lighting system and power type chosen will have an impact on the cost of installation and maintenance of those street lights.

    You should think about the cost of installation as well as the cost over the life of the light pole when making your decision. LED street lights, for example, will cost more to install than incandescent street lights, and they will use significantly more power on a monthly basis. Your lighting system will take into account energy efficiency, as well as the cost of replacement, man-hours, and how the light pole performs.

    Different places and scenery are also taken into consideration. Certain types of illumination will be more effective in specific regions.

The Sales Team You Can’t Resist

The Sales Team You Can’t Resist

24/7 Online Support

Every inquiry will be replied within 2 hours or less

Pre-sale LED lighting consultation

Professional Technical Support

Order following-up

Quick after-sale service

Our Clients Say

  • These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied

    David, Lights Contractor

    David, Lights Contractor


  • I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.

    Kevin, Amazon LED trading

    Kevin, Amazon LED trading


  • They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.

    Pablo, LED distributor

    Pablo, LED distributor


  • Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!

    Ravinder, Owner

    Ravinder, Owner



Please leave us a message and we will get back to you within 12 hours.

Wechat Skype WhatsApp