+86 130 7366 6093

100w LED Street Light for Outdoor

SA series 100w led street light with high luminous efficiency LED chips and high-end LED driver, luminous efficiency up to 165LM / W, it can replace 250W HPS lamp, energy-saving rate of more than 60%, modular design is convenient to maintain and update the generation.

Key features

LED street lighting

Big power range from 30-300w.

High output lumen efficiency, up to 170lm/W.

Modular design allows for easy installation, replacement, and maintenance. This design also creates a chimney effect which provides exceptional thermal management.

Toolless is open for easy installation, replacement, and maintenance.

Power-off protection makes the power automatically off when the fixture is opened.

The level bubble makes it easy for the installer to adjust the position of the lamp.

Tool-less entry to the driver compartment.

Provided with 10KV Surge Protection Devices.

Corrosion-resistant polyester powder painted 100µm in thickness.

Meets a 1000-hour salt spray certification per ASTM B117/ ISO 9227:2012.

Over 10 optical lenses are available for virtually any application.

0, +/-5, +/-10, +/-15 degree of tilting angle adjustment.

Supports Smart City application,7-Pin NEMA socket, and standard outdoor dimming protocols.

e.g. photocell, motion sensor, DALI, 1-10V.

100,000 hours lifetime saving maintenance cost

CE/ RoHS/ IK10/ IP66 / LM80/ LM79

7 years limited warranty available.



Roads, Street, Highways, Parks, gardens, Residential areas


100w led street light

LED BrandLumileds 3030/5050
Driver BrandMeanwell or Inventronics
Nominal Wattage100W
LED Module Quantity2 modules
Input Voltage100-240/277VAC/DC24V
Power Efficiency>90%
Power Factor>0.95
Lamp Rated Luminous Efficiency135-165 lm/w
Lamp Rated Lumen output13500-16500 lm (Lumen tolerance +/- 5%)
Color Rendering Index70( 80 optional)
Color Temperature3000 or 4000 or 5000 or 5700K
Photometric TypeType I Medium; Type II Medium; Type III Medium, TypeV, Short
Optimal Operating Temperature25°
Storage Temperatures-40°C~50°C
Working EnvironmentBetween-40°C~+50°C, 10%~90%RH
Total Harmonic Distortion< 10%
Lumen Maintenance> 100000 hours -L70, @25 ºC (77 ºF)
Wind IndexForce 12
BodyDie-cast Aluminum Housing
CoverPC lens
Pole Fitter Diameter60mm ( 50mm optional)
RatingIP66 IK10
Protection Class I ( Class II optional)
SPD10KV (20KV optional)
Dimming Options1-10V or DALI or PWM or Timer
Control OptionsPhotocell or Motion sensor or Smart control
Color OptionsSilver or Black
Warranty7 years



  1. Who is responsible for street lighting?

    You might be surprised to learn who pays for street lighting, as it varies. The city or county may pay for the lighting in some regions. However, some locations lack street lighting, and if a person demands light, the homeowner is responsible for the cost.

    Alternatively, the local electric company may own and maintain some street lights and charge the city for their use and maintenance.

    Who is responsible for the cost of replacing a street light? This, too, can vary. Frequently, the town or city is liable for the cost of street light replacement. They may still charge a driver, for example, if the original street light is broken in an accident and must be replaced.

  2. What is the cost of installing a street light?

    A street light will typically cost between $2,000 and 3,000 dollars. A street light installation fee of up to $1,000 is possible, depending on the area. However, expenses can vary significantly. The lighting system and power source selected will have an effect on the cost of installation and maintenance of those street lights.

    When making a purchase decision, it's important to factor in the cost of installation as well as the cost throughout the life of the light pole. For example, LED street lights are more expensive to install than incandescent lights, and they consume significantly less energy on a monthly basis. Energy efficiency, as well as the cost of replacement, man-hours, and the way the light pole performs, will all be factors in your lighting system.

    Additionally, different places and landscapes are considered. Particular types of lighting are more effective in certain regions.

  3. What is the cost of street light poles?

    A roadway light pole will cost significantly more than a consumer light pole. The average cost of a street light pole is between $2,000 and $3,000, including installation. The cost of installation varies by city but is often approximately $1,000. Street light poles need more effort to install and are significantly larger.

    Due to the complexity of the cost of a single light pole, it can be challenging for towns and cities to estimate expenses when a big region needs to be addressed. Additionally, the location of the street pole is significant. The cost of installing a city street light pole is cheaper than the expense of installing it in difficult-to-reach regions or on a specific architecture, such as highways or bridges.

The Sales Team You Can’t Resist

The Sales Team You Can’t Resist

24/7 Online Support

Every inquiry will be replied within 2 hours or less

Pre-sale LED lighting consultation

Professional Technical Support

Order following-up

Quick after-sale service

Our Clients Say

  • These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied

    David, Lights Contractor

    David, Lights Contractor


  • I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.

    Kevin, Amazon LED trading

    Kevin, Amazon LED trading


  • They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.

    Pablo, LED distributor

    Pablo, LED distributor


  • Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!

    Ravinder, Owner

    Ravinder, Owner



Please leave us a message and we will get back to you within 12 hours.

Wechat Skype WhatsApp