+86 130 7366 6093

Tool-less 120w Streetlight

120w street lights are designed with toolless clips and plug-in modules, easy for maintenance and update. As a manufacturer of LED street lights, MKLIGHTS has over 15 years of experience in product design, project transformation, and technical support for bidding. Provide free DIALUX lighting design and complete set of road lighting solutions.

Key features

Tool-less 120w Streetlight

Streetlight,LED Road Light,street light price,led street lamp,bajaj street light

Big power range from 30-300w.

High output lumen efficiency, up to 170lm/W.

Modular design allows for easy installation, replacement, and maintenance. This design also creates a chimney effect which provides exceptional thermal management.

Toolless open for easy installation, replacement, and maintenance.

Power-off protection makes the power automatically off when the fixture is opened.

Level bubble makes it easy for the installer to adjust the position of the lamp.

Tool-less entry to the driver compartment.

Provided with 10KV Surge Protection Devices.

Corrosion-resistant polyester powder painted 100µm in thickness.

Meets a 1000-hour salt spray certification per ASTM B117/ ISO 9227:2012.

Over 10 optical lenses are available for virtually any application.

0, +/-5, +/-10, +/-15 degree of tilting angle adjustment.

Supports Smart City application,7-Pin NEMA socket, and standard outdoor dimming protocols.

e.g. photocell, motion sensor, DALI, 1-10V.

100,000 hours lifetime saving maintenance cost

CE/ RoHS/ IK10/ IP66 / LM80/ LM79

7 years limited warranty available.



Roads, Street, Highways, Parks, gardens, Residential areas


Tool-less 120w Streetlight

Streetlight,LED Road Light,street light price,led street lamp,bajaj street light

LED BrandLumileds 3030/5050
Driver BrandMeanwell or Inventronics
Normal Wattage120W
LED Module Quantity3 modules
Input Voltage100-240/277VAC/DC24V
Power Efficiency>90%
Power Factor>0.95
Lamp Rated Luminous Efficiency145-170 lm/w
Lamp Rated Lumen output17400-20400 lm (Lumen tolerance +/- 5%)
Color Rendering Index70( 80 optional)
Color Temperature3000 or 4000 or 5000 or 5700K
Photometric TypeType I Medium; Type II Medium; Type III Medium, TypeV, Short
Optimal Operating Temperature25°
Storage Temperatures-40°C~50°C
Working EnvironmentBetween-40°C~+50°C, 10%~90%RH
Total Harmonic Distortion< 10%
Lumen Maintenance> 100000 hours -L70, @25 ºC (77 ºF)
Wind IndexForce 12
BodyDie-cast Aluminum Housing
CoverPC lens
Pole Fitter Diameter60mm ( 50mm optional)
RatingIP66 IK10
Protection Class I ( Class II optional)
SPD10KV (20KV optional)
Dimming Options1-10V or DALI or PWM or Timer
Control OptionsPhotocell or Motion sensor or Smart control
Color OptionsSilver or Black
Warranty7 years


Streetlight,LED Road Light,street light price,led street lamp,bajaj street light

Tool-less 120w Streetlight


Streetlight,LED Road Light,street light price,led street lamp,bajaj street light



Does increasing the wattage of LEDs increase their output?

This may occur if you are using identical products from the same manufacturer, with the same optics and hardware. In general, however, the nature of the components (such as the optical system, the heat sink, the LED chip, and the driver) has a greater impact on the output than the watts. Even if the same LED chip is used, a 3watt LED luminaire from one manufacturer will have a different output than a 3watt LED luminaire from another manufacturer. Therefore, the use of a high-quality processor alone cannot ensure improved performance. Observe that as wattage rises, efficiency decreases marginally. A 3W LED will emit slightly less than three times the amount of light as a 1W LED.

Do LED street lights (public lights) emit more blue lights than other sources, and does this lead to sleep disruptions?

There should be no concern about the effect of blue LED street lighting on sleep disturbances. According to the United States Department of Energy, there is no difference between the blue light from LEDs and other light sources. What's more essential is nighttime light intensity. The disruptive impact is highly dependent on the quantity, timing, and duration of light exposure. According to research, the light levels generated by LED street lighting are insufficient to influence the hormone levels that regulate our sleep behavior.

How can optics and controls help mitigate any negative impacts of public light?

Philips Lighting controls, such as dusk-to-dawn sensors, may automatically dim or switch off luminaires based on the time of day, lowering not just energy usage but also possible environmental implications. Moreover, our solutions include shields to decrease uplight and sidelight and, most crucially, "optics" to minimize/reduce glare regardless of the quantity of blue light or color temperature (e.g. 3,000K vs 4,000K) they emit.

The Sales Team You Can’t Resist

The Sales Team You Can’t Resist

24/7 Online Support

Every inquiry will be replied within 2 hours or less

Pre-sale LED lighting consultation

Professional Technical Support

Order following-up

Quick after-sale service

Our Clients Say

  • These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied

    David, Lights Contractor

    David, Lights Contractor


  • I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.

    Kevin, Amazon LED trading

    Kevin, Amazon LED trading


  • They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.

    Pablo, LED distributor

    Pablo, LED distributor


  • Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!

    Ravinder, Owner

    Ravinder, Owner



Please leave us a message and we will get back to you within 12 hours.

Wechat Skype WhatsApp