Phone:

+86 130 7366 6093

Europe Style 30w LED Roadway Lighting

European-style 30w LED road light is used for roadway Lighting, which can replace 100W HPS lamp or metal halide lamp. Energy saving rate over 70%, and the brightness is higher, the CRI is better, and the glare is less, which can meet the lighting of BS EN 13201-2-2015 Standard requirements for various road sections.

Key features

LED Roadway Lighting

Wide power range: 30W~240W.

Special circuit design, single LED damage won't affect others' normal work.

Toolless open for easy installation, replacement, and maintenance.

Power-off protection makes the power automatically off when the fixture is opened.

A smooth body would greatly diminish dust accumulation and bird droppings heap up.

Level bubble makes it easy for the installer to adjust the position of the lamp.

High Lumen output up to 150lm/ w with high-quality LED chips.

Vertical and horizontal installation are both available adjustable by ±15° in both directions.

Multiple lighting control options are available, e.g., DALI, 1-10V, photocell, motion sensor.

Designed to last at least 100, 000 hours at L70.

Multiple lighting distributions are available.

CE/ RoHS/ IK08 /IP66 /LM79

5 years limited warranty available.

 

Applications

Street, highway, park lot, roadway, path, etc.

Datasheet

30w led street light

Specifications
ModelMK-SB1-30
LED BrandLUMILEDS®LUXEON 3030 or 5050
Driver BrandMeanwell / Inventronics
Normal Wattage30W
Input Voltage100-240/277VAC/347V/480VAC
Power Efficiency>90%
Power Factor>0.95
Lamp Rated Luminous Efficiency130-150 lm /w
Lamp Rated Lumen output3900-4500lm (Lumen tolerance +/- 5%)
Color Rendering Index70(80 optional)
Color Temperature3000 or 4000 or 5000 or 5700K
Photometric TypeType II Medium; Type III Medium
Optimal Operating Temperature25℃
Storage Temperatures-40°C~50°C
Working EnvironmentBetween-40°C~+50°C,   10%~90%RH
Total Harmonic Distortion< 10%
Lumen Maintenance> 100,000 hours -L70, @25 ºC (77 ºF)
Wind IndexForce 12
Body and Shell MaterialsDie-cast aluminum; Tempered Glass
Pole Fitter Diameter60mm  ( 50mm optional)
RatingIP66 IK08
Protection Class  I ( Class II optional)
SPD10KV (20KV optional)
CertificationCE, ENEC,CB ROHS,LM80,LM79,IP66 IK08,ISTMT
Dimming Options1-10V or DALI or PWM or Timer
Control OptionsPhotocell or Motion sensor or NEMA or ZHAGA for Smart control
Color OptionsDeep grey or Light grey
Warranty5 years





Description

Download

FAQ

  1.  How Good Are LEDs for Roadway Lighting?

    We seem to hear about yet another town making the switch from traditional roadway lighting to LED almost every day. Owen Sound, Ontario, just approved a $1.2 million project to replace 2,000 street lights with LEDs. The city claims that the new lights would save taxpayers money, which is a common claim made by politicians.

    However, not everyone believes that transitioning to LED for street lighting is the best option. Let's look at some of the advantages and disadvantages of LED street lighting.

    LED lights, on the other hand, have a number of advantages that make them perfect for roadside illumination. They are far more efficient than mercury vapor or high-pressure sodium lights, for starters. LED streetlights can save operational expenses because they use less energy and last far longer than traditional lighting. "In the advantage of well-designed LED luminaires are longer life and less maintenance, as well as substantially superior color quality and operating characteristics than the principal incumbent source, high-pressure sodium or metal halide," according to the US Department of Energy.

    The list continues to increase from there. LED lights emit a more directional beam of light, which assists with optimum coverage of the intended area while reducing light pollution. They also switch on virtually instantly, whereas typical street lights might take up to ten minutes to reach full brightness. They come in a variety of color temperatures, not just the color-destroying orange glow that HPS lights are known for. LED streetlights can withstand vibration and very cold temperatures, two environmental factors that have caused a large number of traditional streetlights to fail.


  2. Why your community should consider upgrading to a LED street lighting system?

    1. Consumption of energy is reduced.

    Lowering utility expenditures is a benefit of upgrading to LED fixtures. With up to 50% less energy input, modern LED lights can produce the same or brighter illumination as traditional street lighting installations.

    2. Less Maintenance = Longer Lifespan

    LED lights have a lifespan of up to 100,000 hours. This increased service life is far longer than that of earlier HPS or MH lights, resulting in lower continuing maintenance expenses.

    3. Color Performance Improvements

    LEDs have better color stability, which means they produce more consistent light output during their lifetime. Manufacturers are also offering "warmer" light output options in response to criticism that LEDs provide "too white" light. Additionally, LED does not emit bug-attractive ultraviolet light.

    4. Increased Security

    Because LEDs emit directional light rather than blazing light, communities may better direct their streetlights, decreasing dark areas and shadows. Glare can be reduced or even eliminated using LED optics.

    5. New Applications & Increased Functionality

    LED lights, unlike HPS or MH lamps, do not need to be warmed up and can be dimmed. LEDs are being used in communities to develop intelligent lighting systems that can brighten when vehicles or people are present and fade when they aren't. Furthermore, some LEDs can be used to form a blinking system to notify officials of an emergency or maintenance requirements.

The Sales Team You Can’t Resist

The Sales Team You Can’t Resist

24/7 Online Support

Every inquiry will be replied within 2 hours or less

Pre-sale LED lighting consultation

Professional Technical Support

Order following-up

Quick after-sale service

Our Clients Say

  • These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied

    David, Lights Contractor

    David, Lights Contractor

    Australia

  • I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.

    Kevin, Amazon LED trading

    Kevin, Amazon LED trading

    HongKong

  • They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.

    Pablo, LED distributor

    Pablo, LED distributor

    Spain

  • Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!

    Ravinder, Owner

    Ravinder, Owner

    Nigeria

HAVE ANY QUESTIONS ABOUT OUR PRODUCTS?

Please leave us a message and we will get back to you within 12 hours.

Wechat Skype WhatsApp