Die-casting 200w outdoor street light fixtures adopt full die-casting aluminum housing, tempered glass cover, PMMA optical lens, adjustable bracket, LM79, LM80, TM-21report are available, L90>100,000hrs, high efficiency>150lm/w to replace 400W MH lamp. Support free simulation design for road lighting.
Wide power range: 30W~240W.
Special circuit design, single LED‘s damage won't affect others' normal work.
Toolless open for easy installation, replacement, and maintenance.
Power-off protection makes the power automatically off when the fixture is opened.
Smooth body would greatly diminish dust accumulation and bird droppings heap up.
Level bubble makes it easy for the installer to adjust the position of the lamp.
High Lumen output up to 150lm/ w with high-quality LED chips.
Vertical and horizontal installation are both available adjustable by ±15° in both directions.
Multiple lighting control options are available, e.g., DALI, 1-10V, photocell, motion sensor.
Designed to last at least 100, 000 hours at L70.
Multiple lighting distributions are available.
CE/ RoHS/ IK08 /IP66 /LM79
5 years limited warranty available.
Street, highway, park lot, roadway, path, etc.
|LED Brand||LUMILEDS ® LUXEON 3030 or 5050|
|Driver Brand||Meanwell / Inventronics|
|Lamp Rated Luminous Efficiency||130-150 lm /w|
|Lamp Rated Lumen output||26000-30000 lm (Lumen tolerance +/- 5%)|
|Color Rendering Index||70(80 optional)|
|Color Temperature||3000 or 4000 or 5000 or 5700K|
|Photometric Type||Type II Medium; Type III Medium|
|Optimal Operating Temperature||25℃|
|Working Environment||Between-40°C~+50°C, 10%~90%RH|
|Total Harmonic Distortion||< 10%|
|Lumen Maintenance||> 100,000 hours -L70, @25 ºC (77 ºF)|
|Wind Index||Force 12|
|Body and Shell Materials||Die-cast aluminum; Tempered Glass|
|Pole Fitter Diameter||60mm ( 50mm optional)|
|Protection||Class I ( Class II optional)|
|SPD||10KV (20KV optional)|
|Certification||CE, ENEC,CB ROHS,LM80,LM79,IP66 IK08,ISTMT|
|Dimming Options||1-10V or DALI or PWM or Timer|
|Control Options||Photocell or Motion sensor or NEMA or ZHAGA for Smart control|
|Color Options||Deep grey or Light grey|
Street lights are lamps that illuminate roadways and are often used to refer to lamps that fall within the spectrum of road lighting in traffic lighting. Street lights are frequently employed in a variety of locations that need illumination. Fire is the narrative of human progress and an entrepreneur's quest for illumination. The adoption of fire represents a watershed moment in the evolution of human civilization. The first lights were created by ancient people's bonfires.
Road lights are mostly used on roadways to provide illumination for pedestrians and cars driving at night. It must need road lights to cooperate with the light in order for practical usage to be possible, but the light source must be lighted and have a long life. The life span may be extended indefinitely to suit human needs. Utilize light energy sparingly in order to minimize glare. Its light should be reflected at the required angle, and it should fall on the pavement in the defined pattern. The light is uniformly distributed, the pavement is bright, and the glare is minimal. Light distribution control may be used above the maximum light intensity to minimize glare.
Road lights may be set symmetrically on both sides of the road, interlaced on both sides, on one side, or in the middle of the road, depending on the road section, width, vehicle, and pedestrian circumstances. In general, highways wider than 20 meters and inviting roads may be deemed symmetrically laid out on both sides; roads wider than 15 meters can be interlaced, and smaller roads can be laid out on one side. Energy conservation, reduced carbon emissions, and environmental preservation are the primary paths for future growth. Additionally, road lights may alter people's moods, increase their emotions, and alter their perceptions, producing a palette-like night.
During the day, courtyard lights can enhance the cityscape; at night, courtyard lights not only provide necessary lighting and convenience but also enhance residents' sense of security, while also highlighting the city's highlights and interpreting the bright style, which is still used today and has developed into a mature industrial chain. European-style garden lights are classified according to their design styles, which are influenced by European art components and abstract expression forms. For instance: Crown courtyard lighting. Contemporary courtyard lamp: its design style is characterized by the use of modern art elements, which are represented in a straightforward way, such as spring bloom garden lights. Traditional courtyard lights: The majority of their designs include and alter Chinese classical motifs, such as palace lights. Street lights provide powerful light effects and excellent color rendering capability to withstand routine operation in very cold temperatures. Different street lights have a variety of styles to complement the architecture of urban structures and the way they are used.
The Sales Team You Can’t Resist
24/7 Online Support
Every inquiry will be replied within 2 hours or less
Pre-sale LED lighting consultation
Professional Technical Support
Quick after-sale service
Our Clients Say
These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied
David, Lights Contractor
I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.
Kevin, Amazon LED trading
They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.
Pablo, LED distributor
Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!