+86 130 7366 6093

Syska led street light

Syska led street light is famous for its low price, but MKLIGHTS LED street light is loved by customers with higher cost performance, affordable price while good quality and performance

Key features

Syska led street light 50 watt price

Wide power range: 20W~240W

Luminaire efficacy: Up to 170 lm /w

70% energy saving, short ROI period

Up to 100, 000hrs @ L70, low maintenance cost

World-class, approbated quality components (LEDs /Driver /etc.)

Tool-less opening of driver box, ease of maintenance

Support horizontal and vertical mounted, suitable for different light poles

High-pressure die-cast aluminum and Tempered glass cover

More than 10 types of light distributions for optional

Power-off protection makes the power automatically off when the fixture is opened.

A smooth body would greatly diminish dust accumulation and bird droppings heap up.

Level bubble makes it easy for the installer to adjust the position of the lamp.

1500 hours salt spray test report.



Local roads, Express roads, Town roads, Residential area roads, Pedestrian crossings, Parking areas


Syska led street light 90w

LED BrandLumileds 3030/5050
Driver BrandMeanwell or Inventronics
Normal Wattage180W
Input Voltage100-240/277VAC/DC12/24V
Power Efficiency>90%
Power Factor>0.95
Lamp Rated Luminous Efficiency150-160 lm/w
Lamp Rated Lumen output27000-28800 lm (Lumen tolerance +/- 5%)
Color Rendering Index70( 80 optional)
Color Temperature3000 or 4000 or 5000 or 5700K
Optic (IESNA)Type II Medium; Type III Medium
Optimal Operating Temperature25°
Storage Temperatures-40°C~50°C
Working EnvironmentBetween-40°C~+50°C,   10%~90%RH
Total Harmonic Distortion< 10%
Lumen Maintenance> 100000 hours -L70, @25 ºC (77 ºF)
Wind IndexForce 12
BodyDie-cast  aluminum Housing and Tempered glass
CoverPC lens
Pole Fitter Diameter60mm ( 50mm optional)
RatingIP66 IK10
Protection Class I ( Class II optional)
SPD10KV (20KV optional)
CertificationCE, ROHS, ENEC, CB, LM80, LM79, IP66, IK10
Dimming Options1-10V or DALI or PWM or Timer
Available on requestNEMA socket (3/5/7pins), ZHAGA socket, Short cap, Photocell, Motion sensor, Knife switch, NTC, OLC, Solar Compatible, DALI Dimming
Warranty5 years



  1. What is LED Street Lighting?

    While LED street lighting technology is still relatively young, the science behind it is well understood because LEDs have been around for decades. A LED bulb has a somewhat different structural structure; it is essentially a light bulb without the filament. Furthermore, the color temperature and illumination intensity are solely determined by electron mobility in the semiconductor material. Furthermore, because LEDs use solid-state technology, they are easier to control and program, making them one of the most adaptable and flexible lighting sources available today.

  2. How is LED street light designed?

    It may appear that installing LED street lighting is an easy task. It is, however, a difficult process involving complicated engineering accounts.

    Because of the quick expansion in market share and high-profit rate in this area since we introduced LED lighting technology, many companies in many sectors that do not have technical infrastructure have entered the field of LED lighting.

    Barbecue manufacturers have begun to produce LED lights. However, the majority of these businesses specialized in assembly. These devices broke before the warranty term ended due to a lack of engineering. Consumers sought to apply for a warranty from the corporation, but none were accessible.

    The number of companies has increased dramatically, but they have also been wiped out of the market at the same time. These producers, who are just interested in making a lot of money in a short amount of time and don't care about product quality, have shattered faith in LED technology. Other producers on the market were also harmed as a result of their actions.

    When designed appropriately, not only street lights, but all LED lighting fixtures can be operated without difficulties for decades.

    LEDs, the printed circuit board (PCB) on which these LEDs are placed, secondary optical thermal conductors such as lens and reflector, LED driver, and housing make up an LED street lighting fixture.

    The choosing of LEDs is the initial step in the lighting armature design process. When choosing LEDs, pay close attention to the LED datasheet and test reports. Because LED Selection will dictate how the rest of the system is designed.

    The LED selection process will not end with identifying the LED's package, brand, and model. LEDs of various hues and luminances can be found in the same model. Color bin and flux bin selection must be done via a datasheet in order to accomplish this.

    The necessary number of LEDs and adequate connection structure should be installed on the print circuit board (PCB). The LED module is the name of this device. Following the design of the LED module, the LED driver must be chosen to supply the required driving current to the module. The LEDs will fail in a short length of time if the limit values are passed over them.

    Primary optical refers to the optical substance used on the LED package. The LED may emit light at a specific angle thanks to these optics. Because of their utilization, LED streetlights necessitate secondary optical solutions. Asymmetric light distribution is achieved by using high-efficiency lenses in street lighting. The amount of light that passes through a lens is an important factor to consider when choosing a lens. Lenses with low light transmittance lose light. Reduces the efficiency of the system.

    For LED lighting, the most crucial element affecting product life heat. As a result, the heat created by the LEDs should be dissipated using the cooler housing.

    The thermal pad on the lower surface of the LED transfers the heat generated by the LEDs to the aluminum printed circuit board. To be evacuated, the heat from the aluminum printed circuit board must be transferred to the cooler body.

    The print circuit is attached to the body's inside surface by screws. Screwing, on the other hand, is insufficient for heat conduction. Even though the spaces between the card and the body are not apparent, they still exist. Thermal conductive material must be used to fill these gaps. The thermally conductive paste is applied to the body's inside surface, and then the card is inserted and screwed in place for a precise assembly.

    Because of its high thermal conductivity, the armature body is composed of aluminum. Based on factors such as led selection, led driving current, and safe operating temperature, the construction, and size of the cooler body are decided.

    Because led street luminaires are designed to be used outside, the electrical components in the body structure must be resistant to water, dust, and moisture. As a result, it must have an IP65 protection rating at the very least, and preferably an IP66 or IP67 protection level.

The Sales Team You Can’t Resist

The Sales Team You Can’t Resist

24/7 Online Support

Every inquiry will be replied within 2 hours or less

Pre-sale LED lighting consultation

Professional Technical Support

Order following-up

Quick after-sale service

Our Clients Say

  • These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied

    David, Lights Contractor

    David, Lights Contractor


  • I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.

    Kevin, Amazon LED trading

    Kevin, Amazon LED trading


  • They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.

    Pablo, LED distributor

    Pablo, LED distributor


  • Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!

    Ravinder, Owner

    Ravinder, Owner



Please leave us a message and we will get back to you within 12 hours.

Wechat Skype WhatsApp