+86 130 7366 6093

Smart LED Street Light

The smart led street light can be connected to Zigbee or Lora system with NEMA or ZHAGA base, which can realize remote intelligent control, such as fault monitoring and dimming. L series pole top light also can hanging or side entry mounted, over 10 types of light distribution for optional, best suit for urban light, road light and street lighting.

Key features

Smart led street light, smart street lamp, smart city street lighting, Philips smart bright street light, led smart streetlight

Die-cast aluminum housing with flat tempered glass.

Toolless open for easy installation, replacement, and maintenance.

Power-off protection makes the power automatically off when the fixture is opened.

A smooth body would greatly diminish dust accumulation and bird droppings heap up.

Possible energy savings of more than 70%. 100,000 hours lifetime saving maintenance cost.

The LED engine, consisting of the LED light source and the power supply, can be easily replaced or upgraded. Designed for easy technology upgrade (Future Proof)

Electronic temperature monitoring prevents overheating of LEDs and power supply.

Provided with 10KV Surge Protection Devices.

Corrosion-resistant polyester powder painted 100µm in thickness.

Meets a 1000-hour salt spray certification per ASTM B117/ ISO 9227:2012.

Optimized roadway photometric distributions, ULOR = 0 (zero uplight)

Post-Top Mounted, Pendant Mounted, Side Entry Mounted, Suspended Mounted for optional.

Supports Smart City application,7-Pin NEMAsocket, and standard outdoor dimming protocols.

e.g. photocell, motion sensor, DALI, 1-10V.

CE/ RoHS/ IK08/ IP66 / LM80/ LM79.

7 years limited warranty available.



Urban Roads, Urban Street, Parks and gardens, Residential areas


Smart led street light, smart street lamp, smart city street lighting, Philips smart bright street light, led smart streetlight

ModelMK-SCX-27( X= 1,2,3,4)
LED BrandLUMILEDS® LUXEON 3030 or 5050
Driver BrandMeanwellHLG series/ Inventronics
Normal Wattage27W
LED Chip Quantity3030: 72pcs 5050: 36pcs
Input Voltage100-240/277VAC
Power Efficiency>90%
Power Factor>0.95
Lamp Rated Luminous Efficiency130-150 lm /w
Lamp Rated Lumen output3510-4050 lm (Lumen tolerance +/- 5%)
Color Rendering Index70(80 optional)
Color Temperature3000 or 4000 or 5000 or 5700K
Photometric TypeType I Medium; Type II Medium; Type III Medium; TypeV, Short
Optimal Operating Temperature25℃
Storage Temperatures-40°C~50°C
Working EnvironmentBetween-40°C~+50°C, 10%~90%RH
Total Harmonic Distortion< 10%
Lumen Maintenance> 100,000 hours -L70, @25 ºC (77 ºF)
Wind IndexForce 12
Body and Shell MaterialsDie-cast aluminum; Tempered Glass
Pole Fitter Diameter60mm
RatingIP66 IK08
Protection Class I ( Class II optional)
SPD10KV (20KV optional)
CertificationCE, ENEC,CB ROHS,LM80,LM79,IP66 IK08,ISTMT
Dimming Options1-10V or DALI or PWM or Timer
Control OptionsPhotocell or Motion sensor or Smart control
Color OptionsDeep grey
Warranty7 years


Smart led street light, smart street lamp, smart city street lighting, Philips smart bright street light, led smart streetlight

smart led street light


Smart led street light, smart street lamp, smart city street lighting, Philips smart bright street light, led smart streetlight



What is intelligent or smart street lighting?

In a smart city, intelligent street lighting is public street lighting that reacts to the movement of people, bikes, and automobiles. Also known as adaptive street lighting, it brightens when activity is detected and dims otherwise. This differs from standard fixed lighting and timer-controlled lighting.

What Does An Efficient Smart Street Lighting System Look Like?

A smart street light system consists of a cluster of streetlight bulbs that are capable of communicating with one another and transmitting illumination data to a local concentrator. The concentrator controls and sends pertinent data to a secure server, which gathers and displays the data through a web browser dashboard.

A smart street lighting system also includes two-way communication, which is the system's frosting on the cake. It enables facility managers to remotely operate street lights and monitor the power usage of the lamps and drive circuits. Monitored street light networks save maintenance expenses since each lamp has a unique identifier and can be localized. Therefore, if a street light breaks, falls, or malfunctions in any way, repair may be arranged in an efficient, cost-effective, and timely manner.

Even more impressively, if the night is brilliantly lighted by the moon, for instance, smart street lighting ensures lower energy use by remotely reducing or intensifying the lights. This may also be done based on meteorological conditions, such as fog or rain. Also ensured is the efficient gathering of data, which city planners may employ to extend light systems as cities develop.

Smart LED Street Light

The fundamental element of a smart street lighting system is the intelligent lamppost, which consists of the following three elements:

1. The most energy-efficient LED street lighting

2. IoT-based communication for the development of a digitally monitored, secure, and dependable network.

3. Addition of several intelligent sensors to monitor weather conditions, lamppost tilt, air pollution, etc.

LED Intelligent street lighting must provide specified values of brightness, dimness, uniformity, and glare based on the kind of road in order to provide vehicles and pedestrians with the highest level of visual safety. High-performance luminous sources, such as High-Intensity Discharge (HID) lamps and LEDs lamps, are used for this purpose. These energy-efficient lighting devices feature longer bulb lives and reduced energy usage compared to conventional lighting. The actual intelligence of these lamp solutions is based on a digital method in which a microcontroller manages all the tasks required for an efficient and well-functioning lamp, as well as all the data required to establish a smart street lighting network.

IoT-based communication — Networked street lighting systems may be administered using a variety of established communication protocols. The connectivity is bidirectional, so the monitored system may both transmit and receive data and orders from and to the light. The manner in which a facility manager chooses, for instance, how much to dim light, relies on a variety of factors, such as the weather, the lamp's inclination, the proximity of people, the road conditions, the time of day, and more. This information may be gathered by cluster and sent to a central service center, where the data is monitored and appropriate action is performed.

Smart Sensors — As discussed before, smart sensors may be utilized to monitor real-time changes in information such as lamp tilt, weather conditions, air pollution, natural light availability, and more. This data may improve road safety and save maintenance expenses.

The Sales Team You Can’t Resist

The Sales Team You Can’t Resist

24/7 Online Support

Every inquiry will be replied within 2 hours or less

Pre-sale LED lighting consultation

Professional Technical Support

Order following-up

Quick after-sale service

Our Clients Say

  • These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied

    David, Lights Contractor

    David, Lights Contractor


  • I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.

    Kevin, Amazon LED trading

    Kevin, Amazon LED trading


  • They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.

    Pablo, LED distributor

    Pablo, LED distributor


  • Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!

    Ravinder, Owner

    Ravinder, Owner



Please leave us a message and we will get back to you within 12 hours.

Wechat Skype WhatsApp