Post top light with smart system, also known as LED garden light, is generally installed on the top of a straight pole. SC post top light adopts a tool-free cover opening design, with a standard 10KV surge, which can be used for wire rope installation, side entry mounted, hanging mounted, post top mounted, Can be used in roads, parking lots, parks.
Die-cast aluminum housing with flat tempered glass.
Toolless open for easy installation, replacement, and maintenance.
Power-off protection makes the power automatically off when the fixture is opened.
A smooth body would greatly diminish dust accumulation and bird droppings heap up.
Possible energy savings of more than 70%. 100,000 hours lifetime saving maintenance cost.
The LED engine, consisting of the LED light source and the power supply, can be easily replaced or upgraded. Designed for easy technology upgrade (Future Proof)
Electronic temperature monitoring prevents overheating of LEDs and power supply.
Provided with 10KV Surge Protection Devices.
Corrosion-resistant polyester powder painted 100µm thickness.
Meets a 1000-hour salt spray certification per ASTM B117/ ISO 9227:2012.
Optimized roadway photometric distributions, ULOR = 0 (zero uplight)
Post-Top Mounted, Pendant Mounted, Side Entry Mounted, Suspended Mounted for optional.
Supports Smart City application,7-Pin NEMA socket, and standard outdoor dimming protocols.
e.g. photocell, motion sensor, DALI, 1-10V.
CE/ RoHS/ IK08/ IP66 / LM80/ LM79.
7 years limited warranty available.
Urban Roads, Urban Street, Parks and gardens, Residential areas
|Model||MK-SCX-27( X= 1,2,3,4)|
|LED Brand||LUMILEDS® LUXEON 3030 or 5050|
|Driver Brand||Meanwell HLG series/ Inventronics|
|LED Chip Quantity||3030: 72pcs 5050: 36pcs|
|Lamp Rated Luminous Efficiency||130-150 lm /w|
|Lamp Rated Lumen output||3510-4050 lm (Lumen tolerance +/- 5%)|
|Color Rendering Index||70(80 optional)|
|Color Temperature||3000K or 4000K or 5000K or 5700K|
|Photometric Type||Type I Medium;Type II Medium;Type III Medium; TypeV, Short|
|Optimal Operating Temperature||25℃|
|Working Environment||Between-40°C~+50°C, 10%~90%RH|
|Total Harmonic Distortion||< 10%|
|Lumen Maintenance||> 100,000 hours -L70, @25 ºC (77 ºF)|
|Wind Index||Force 12|
|Body and Shell Materials||Die-cast aluminum; Tempered Glass|
|Pole Fitter Diameter||60mm|
|Protection||Class I ( Class II optional)|
|SPD||10KV (20KV optional)|
|Certification||CE, ENEC,CB ROHS,LM80,LM79,IP66 IK08,ISTMT|
|Dimming Options||1-10V or DALI or PWM or Timer|
|Control Options||Photocell or Motion sensor or Smart control|
|Color Options||Deep grey|
Outdoor lighting that is often fixed on poles and situated in streets, paths, parking lots, and business and educational campuses is referred to as post top lighting.
Outdoor lighting that is often fixed on poles and seen in streets, paths, parking lots, and business and educational campuses is referred to as post top lighting. Decorative post top fixtures are often used to provide lighting for pedestrian and vehicular usage and safety, with the most common feature being that the light fixtures are attached vertically on poles ranging from 7 to 20 feet in height. Multiple fixtures installed on a single pole are fairly commonplace, with the mounting technique varied greatly.
The three most often cited advantages of LED post top lights are as follows:
Savings on energy
The typical wattage range for LED post top lights is 25 to 106 watts, which results in a 35 to 80 percent decrease in energy usage. This is due to the GENERATION remarks above and may result in annual power cost savings of up to $800 per fixture.
Cost Savings on Maintenance
Again, owing to the way LEDs emit light, their useful life is significantly different. Rather than stopping to work correctly when the fuel supply is greatly diminished, the light output produced by LEDs decreases VERY SLOWLY over time. As a consequence, the useful life of an LED product (sometimes exceeding 100,000 hours) may be substantially greater than that of an HID lamp, greatly lowering the cost of maintaining post top fixtures over a longer period of time.
Performance of the Lighting
Moving on to the DISTRIBUTION of light by LED lights, due to their multi-point architecture, LED post top lighting applications often provide a very EVENLY spread light pattern. This implies that when the distance from the pole or fixture varies, the variation in light levels over a given area will decrease. This is in contrast to HID lamps, which often produce a "bright spot" just under the bulb, with light levels rapidly falling as the distance from the pole rises. The consequence of the LED conversion, as compared to HID, is a more uniform foot candle distribution. Along with the equal dispersion of light, LEDs come in a variety of color temperatures, providing a variety of possibilities for increasing the visual experience of "brightness."
The Sales Team You Can’t Resist
24/7 Online Support
Every inquiry will be replied within 2 hours or less
Pre-sale LED lighting consultation
Professional Technical Support
Quick after-sale service
Our Clients Say
These people are adorable. The led street lights I ordered have been working well so far, the mayor is very satisfied
David, Lights Contractor
I like work with this company. They are always prompt. So I don't need to do so much stock of flood lights for sale.
Kevin, Amazon LED trading
They have a professional team that can provide a wonderful lighting design, which is really helpful for promote Industrial lighting.
Pablo, LED distributor
Awesome to work with MKLIGHTS, It has been installed for 5 years and none of the led gas station lights failed, this is really amazing!