80w tunnel lighting | Lighting solutions for tunnels

80w tunnel lighting for road

tunnel lighting, pedestrian tunnel lighting, road tunnel lighting, tunnel lighting fixtures, led tunnel lighting supplier

tunnel lighting, pedestrian tunnel lighting, road tunnel lighting, tunnel lighting fixtures, led tunnel lighting supplier

tunnel lighting, pedestrian tunnel lighting, road tunnel lighting, tunnel lighting fixtures, led tunnel lighting supplier

How do we solve the tunnel lights"s white holes and black holes?

What are tunnel lights' "white holes" and "black holes"? People pass through the tunnel, and the visible light exhaustion is equivalent to being in the bright face of the tunnel, so they cannot see the tunnel. This is referred to as a "black hole," whereas the reverse is a "white hole." You are on the tunnel's dark side, thus you can only see a brilliant light inside the tunnel. It has not emerged from the tube. These two circumstances are prone to traffic accidents, which may be avoided by installing tunnel lights.

There are many different types of tunnel lighting, including sodium lamp tunnel light, electrodeless tunnel lamp, and LED tunnel light. Each light has distinct benefits and qualities.

Materials for creating tunnel lights are often rather specific. They have high tensile strength, excellent compression resistance, and can endure metals that are cold and heat resistant. The tunnel lamp's ballast utilizes the most sophisticated overheating prevention technology, therefore significantly extending the lifespan of lights and lanterns. Imported aluminum anti-oxidation material with high reflectivity comprises the reflector.

After receiving the line, we must verify that each tunnel light can operate correctly. The tunnel light is very stable, easy to use, practical, and low failure rate.

How to correctly install the tunnel lighting system?

1. Measuring tunnel light output

The installation of tunnel lights and stents is precise and aesthetically pleasing, and the measurement procedure is crucial. First, it must be determined if the actual height of the road surface from the tunnel's apex corresponds with the illumination construction blueprints.

Height: Using the height of the tunnel exit direction as the reference point, determine the level of the tunnel entrance level, designate a point on each 10m side, connect a professional waterline to the first end to serve as the center of the installation of lamps and lanterns, and make a mark to create an appropriate hole. A conventional model of the lamp bracket is constructed from a plate of reasonably solid material, and the position of the lamp holder is drilled based on the location and height of each light.

2. Installation of the tunnel lamp's base

The construction crew uses the trolley to drill holes with the percussion drill according to the measured position and to secure the light bracket to the tunnel wall using expansion bolts. The impact bit should be perpendicular to the tunnel wall during operation. The bolt's head should not exceed 1 mm in diameter, and the expansion bolt must be fastened.

3. Installation of a high-pressure sodium light

The look of the luminaire remains intact, the components are securely linked, and the sealing fulfills IP65 specifications. Technical inspection: the model conforms to the design and all relevant certificate information is present. After the electrical test, the single light is mounted and the luminaire's illumination is adjusted.

In line with the aforesaid procedure, the tunnel luminaire will be retested and adjusted following the installation of the 10 percent luminaire. The fundamental optical axis of the tunnel may be positioned on either side of the road's centerline, and the emergency light's light curve should be centered on the tunnel pavement. The other lighting is changed to optimize curve lighting.