Table of Contents [hide]
Clearly, each sport has distinct lighting needs. This is the reason why there are so many possibilities for field lighting. Tennis is one of the most popular and widely performed sports. The sport is played on tennis courts. There are several sorts of courts, including outdoor and indoor, as well as small, medium, and huge.
If the outdoor/underground parking lot architectural lighting and tennis court lights are not built appropriately, it may result in a negative user experience and high energy costs. This is why you must invest in appropriate and high-quality tennis court lighting. To have the optimal lighting solution for a tennis court, you must have an extensive understanding of tennis court lighting.
This article explains all there is to know about tennis court lighting. Have a look!
Tennis court lighting consists of lights that provide enough illumination and evenly disperse light throughout the court. Lamp-side lateral illumination is present on both sides of the tennis court. In addition, two or three light poles are put on each side along the long axis.
The tennis court must have the appropriate illumination regardless of the event or audience size. This is to ensure that everyone has a clear perspective of what is occurring. The ball should be plainly visible regardless of its speed or location.
The tennis field lights will enhance the spectator experience and increase safety. It improves the performance of gamers by enhancing their eyesight.
Good outdoor/underground parking lot and architectural lighting design also improve the lighting experience for walkers.
Tennis is a ball sport that is often played between two singles or two couples. On the tennis court, the player strikes the tennis ball with a racket over the net. Tennis requires considerable strength and quickness. Some elite tennis players can serve at speeds above 200 km/h. Because tennis is played at such a rapid pace, it is quite difficult to gauge its effect! This also significantly increases the challenge of tennis competition and imposes tougher and more professional lighting standards.
MK Lighting is a manufacturer of National training tennis court lighting, FIFA sports competition events lighting, major cricket stadium lighting, etc.
As we see Federer, Nadal, Djokovic, Li Na, and other elite sportsmen play magnificently on the court, we too are ecstatic. On the tennis court, we will experience a variety of emotions. However, it will sometimes offer us a negative experience. For instance, if you go to particular courts at night to play, you will often be blinded by the lights, or there will be dark parts where you cannot see the course, which has a significant impact on your mood and condition.
Why? Due to poor tennis court illumination.
So, what kind of lighting should be used for the tennis court? With so many tennis court lighting options available, which should I select? Today, we will compare different lights typically used to illuminate tennis courts.
The metal halide lamp as a tennis court lighting fixture not only uses power but also has a fatal weakness in its delayed start-up. It takes 15 minutes to reach maximum brightness, and the start-up speed is really sluggish. Imagine that while your consumers are perspiring on the sports field, the lights restart due to a trip or accidental touch. The metal halide light is restarted after fifteen minutes. Do you believe it's possible for consumers to wait fifteen minutes? If this continues, your business hours will be delayed and your clients will be unsatisfied, resulting in customer loss and decreased operational earnings.
MK LED tennis court lighting is customized according to the unique features of the court, with an anti-glare design and anti-glare lampshade, high uniformity, low glare, comfort, and zero light pollution. The lamp body is built of high-quality aircraft aluminum profiles, and it employs phase change heat dissipation technology and air circulation design to assure heat dispersion. The light source utilizes imported LED chips of the highest quality, with great brightness, light color integration with the stadium, a long lifespan, and softer light.
However, the quality of LED bulbs now available on the market ranges from decent to poor. For instance, 100W tennis court lights might cost anything from dozens to hundreds of dollars. As a customer, you must be vigilant. In terms of manufacturing methods and components, lights are comparable to many other commodities at that time. The variation in materials determines the pricing of items such as three, six, and nine. As with chips, it is believed that they all utilize a major brand, although there is a distinction between 3030 and 5050.
LED high bay lighting is often used to illuminate indoor tennis courts. MK LED High Bay light takes pride in the straightforward installation and purchasing of its products. LED High Bay BD installation choices are adaptable to any application. Additionally, it is appropriate for ceiling heights between 15 and 40 feet.
In conclusion, for the selection of tennis court lighting fixtures, varied venue settings and positions will need distinct illumination requirements. The following are worldwide lighting regulations for tennis courts for your reference:
|Tennis Court Lighting Standards For Entertainment And Fitness|
|Classification||Eh (lx)||Eh Uniformity||GR max||Ra||TCP (k)|
|Outdoor Tennis Court||Standard||150||125||0.3||0.2||0.6||0.5||50||≥65||4000|
|Indoor Tennis Court||Standard||250||200||0.3||0.2||0.6||0.5||50||≥65||4000|
|Outdoor Tennis Court Lighting Standard|
|Classification||Eh (lx)||Ev (lx)||Eh Uniformity||Ev Uniformity||Ra||TCP (K)|
|Camera distance||25m||－||－||1000||700||0.5||0.3||0.6||0.5||0.5||0.3||0.6||0.5||≥80||4000/ 5000|
PPA-main competition area, TPA-total competition area;
For the tennis semi-finals broadcast on TV, the illuminance level of the semi-final total competition area should be based on the value of the main competition area.
International Tennis Federation regulates the dimensions of tennis courts (ITF). Typically, the court is 78 feet long, 27 feet broad, and 36 feet wide for singles matches and doubles matches, respectively. When it comes to installation, it is advised that the poles be at least 8 meters tall. In the case of official competitions, the height of the poles must be at least 12m.
The illumination of the tennis court depends on the court's characteristics. Class I, Class II, and Class III are the different levels of competition.
For such contests, 450 lux is necessary because of the high level of play.
Illumination for commercial and club tournaments should be around 350 lux.
It requires a low level of play, so 250 lux is more than enough.
MKLIGHTS provides an extensive selection of tennis court lights for installation. Regardless of the type of your court, you can discover the ideal tennis court lighting.
According to our years of expertise in lighting design, the typical height of tennis court light poles is between 6 and 8 meters (20ft-26.7ft). Depending on the stadium's lighting needs, the wattage of court lights is typically between 300 and 500W. The following solution is provided for reference purposes.
8 poles (6m/20ft)
Standard tennis court (36*18m/120*60ft), installed 8PCS MK LED 400W to achieve average lux 783lux.
6 poles (8.7m/29ft)
Standard tennis court, put 6PCS MK LED 300W to achieve average lumen 500lux.
Standard tennis court, put 6PCS MK LED 200W to achieve average lumen 300lux.
4 poles (12m/40ft)
Standard tennis court, installed 4PCS MK LED 500W to achieve average lux 419lux.
Standard tennis court, installed 8PCS MK LED 300W to achieve average lux 489lux.
Brightness is the fundamental need for tennis court lighting. The court must be well illuminated so that players and spectators can see clearly. Numerous courts use HID floodlights to illuminate the whole area. They may be affordable, but additional lighting must be added.
The LED lights are superior to HID lights because they provide more degrees of brightness. Technically, the maximum power of LED lights is 10,000 watts, but the maximum power of metal halide lamps is just 1,500 to 2,000 watts.
Another requirement for tennis court lighting is its efficiency. Since the light will be on for most of the day, the energy bills will be rather high. This is where LED lights are useful; they are noted for being energy efficient.
Luminous efficacy is used to determine the effectiveness of a light source. Lm / W is the unit used to assess effectiveness, where lm represents lumen. Remember that the higher the lumen, the greater the brightness.
The luminous efficacy of LED lights is between 130 and 160 lm/W, whereas metal halide has between 75 and 100 lm/W, HPS has between 90 and 100 lm/W, and halogen has between 10 and 20 lm/W. This indicates that for every watt of power used, an LED light will output 150 lumens. Therefore, LED lighting will save more power than any other lighting technology.
The lifespan of the light is one of the most significant things you must consider. Because the courts are open until late at night, the lights must have a lengthy lifespan. If a light has a limited lifespan, it will need to be replaced regularly. This not only raises maintenance and replacement costs but also operating expenses. Outdoor/underground architectural and tennis court lighting installation is expensive.
LED lighting has a long lifespan, since it may last up to 100,000 hours. The halogen light, on the other hand, will only last for 2000 hours, but metal halide may survive for up to 10,000 hours. Consequently, LED lights provide the highest performance.
MK Lighting provides the most durable lighting system available.
When purchasing tennis court lights, how to buy the best tennis court lights, and what issues you need to pay attention to, here are the factors you need to consider.
The waterproof characteristics of the lamp should be one of your first considerations. It is essential that the lamp has at least IP64 water resistance. Thus, these lights may be used anyplace. Due to the absence of gas discharge, brittle glass, and filament, LED lighting may be made to be waterproof without any difficulty.
To save maintenance costs, you must choose a long-lasting and high-quality LED light. To choose an efficient LED light, you must choose a luminaire with a high-efficiency rating. This implies it will use less energy and emit less light.
In order to get the appropriate LED light, you must examine the color temperature. The suggested color temperature range for cool white is 5000 to 6000K. Some tennis courts need a light with a color temperature between 2800 and 3500K.
The anti-glare function is one of the most essential aspects of the LED light. The strong light that causes annoyance or pain is the glare. The anti-glare lens of the LED Lucky lights lessens the dazzling impact and facilitates visibility.
Heat dissipation is a further crucial component. It is essential for indoor tennis courts since the light's lifespan might be diminished if heat is trapped within.
In order to brighten the tennis court, it is essential to have a high degree of light homogeneity. This indicates the ratio of lowest to highest lux. Generally, 0.6 to 0.7 light uniformity is sufficient.
LED lights are simple to install, requiring neither expert assistance nor specialized tools.
LED lights have to have a modular design since it facilitates maintenance. You will not have to remove the whole fixture to make repairs.
Few individuals consider the warranty of LED lights. This is a huge mistake. Before purchasing, it is recommended to investigate the manufacturer's warranty. MKLIGHTS provides (insert year) a warranty on every tennis court lighting.
Let us take the FE series tennis court as an example, the approximate price is as follows:
Different configurations have different prices, if you need to know the exact price, please contact the MK sales team.
In recent years, several tennis facility operators have installed contemporary LED systems. The cost of installing LED tennis court lighting varies from $30,200 to $233,200 per court, depending on product quality, the required brightness of the floodlights, and regional variations. The factors that affect the ultimate pricing of a tennis lighting installation project are explained in full below.
Since you may utilize part of the existing lighting infrastructure, upgrading to LED lighting by converting your current HID lighting system is a simpler and less expensive undertaking. The conversion to LEDs is accomplished either by replacing existing lighting fixtures with LED fixtures or by installing solely LED lights. The cost per court to upgrade a HID tennis lighting system with LEDs varies from $16,400 to $44,600.
Whether you are renovating an existing facility or constructing a brand-new one, the purchase price is not the only factor to consider. The true economic worth of LED tennis lighting systems is seen in their running expenses: cheaper power bills, less frequent bulb replacement, less maintenance and upkeep, fewer repairs, and fixture replacement. Ultimately, the cost to run an LED tennis lighting system is determined by the level of competitiveness, the efficacy of the lighting fixtures (lumens per watt), and the price of power in your state.
Are you planning to install or enhance your sports facility's LED lighting? Utilize our tennis court lighting cost calculator to get a personalized estimate of costs:
a. Installation of a LED lighting system for a new tennis court
b. Upgrade existing tennis court lights to LED
|Tennis LED Sports Lighting System, Poles, Control system||$16,400 - $168,000|
|Installation of poles||$4,000 - $24,000|
|Installation of fixtures||$6,200 - $28,000|
|Wiring from contractors to poles||$2,400 - $9,800|
|Structural engineering||$1,200 - $3,400|
|Total||$30,200 - $233,200|
Therefore, lighting is a crucial aspect of a tennis court, since the ability of the players, the quality of the experience, and everyone's safety rely on it. When it comes to selecting the optimal lighting solution, LED light is the superior alternative. It provides the ideal amount of luminosity, homogeneity, energy efficiency, and longevity. MK lighting provides superior LED lights to illuminate the tennis court. We have an assortment of LED lights that are appropriate for all sorts of tennis courts. For further details, please visit our website.
|300w Outdoor Floodlight||IP66 and IK10 240w led flood lights||400 Watt LED Flood Light Fixture|
|180w tennis court led flood lights||150w Outdoor Flood Light||800W Led Tennis Court Lights|
|40W outdoor flood lights in the Czech Republic||240w led outdoor flood light in Ecuador||240w led flood light in Philippines|
|840w tennis court lighting project in Mexico||60w led outdoor flood light for Highway bridge||560w led projector light in Malaysia|
For a tennis court at a club that is used for competitions or professional play, eight lights and 60,000 lumens are necessary. Because LED lights are so much more efficient than metal halide lamps, far fewer watts are required to generate this level of illumination.
Included in tennis court upkeep are the following:
Power-washing a surface to remove dirt, dust, sap, and other contaminants.
A gas or electric blower for removing leaves, tiny branches, and puddles.
As required, repair cracks and low locations known as "bird baths."
Resurface as required to maintain brilliant colors and even bounce.
Metal halide lamps have been a mainstay in sports lighting for decades. Metal halides were recognized for their efficiency and brilliance in comparison to conventional incandescent lighting. Despite the fact that metal halides have served their function effectively for decades, lighting technology has advanced to the point that LED lighting is now regarded as the gold standard in sports lighting.
LED lighting has proved to be much more than just a passing fad, so if your tennis club is still utilizing metal halide lights, here are a few reasons why you should strongly consider switching to LED lighting.
1. LED's Lifetime is longer
A metal halide lamp has an average lifetime of 20,000 hours, whereas an LED light fixture has an average lifespan of about 100,000 hours. not duplicate In contrast, metal halide lamps often lose 20 percent of their original brilliance after six months of usage.
2. LEDs are brighter
In addition to lasting longer, LEDs are often brighter, to begin with. The fact that a 1000-watt metal halide bulb produces the same amount of light as a 400-watt LED bulb is a major selling point for LED lighting. This implies that by converting from metal halide to LED lights, you're saving a tonne of power and a tonne of money on your energy bill, a choice that will benefit both the environment and your pocketbook.
3. LEDs need less maintenance
Because metal halide lights depreciate and have a shorter lifetime, they need regular maintenance and replacement to keep your club's lighting up to par. LED lights, on the other hand, maintain their illumination quality throughout their extended lifetime, therefore they do not need much maintenance.
4. LEDs are less costly
Yes, the initial cost of LED lights is more than that of typical metal halide bulbs, but the long-term savings significantly surpass the initial cost. As stated in point 2, LED bulbs use substantially less power to reach the same level of brightness as metal halide lamps, enabling you to save money on your electricity bill. In addition, as stated in point 3, there are essentially no maintenance expenses connected with LED lighting, which represents an additional substantial savings over the long run. Read about the lighting project we completed for the Portarlington Tennis Club for a real-world example of how converting to LED lights may save your long-term lighting expenditures by up to 50 percent.
5. Less spill light
The light emitted by metal halides is omnidirectional, which means that it is emitted in all directions. This is troublesome for illuminating outdoor spaces such as tennis courts and football ovals since the absence of directed focus increases the quantity of unwanted spill light. In contrast, the light emitted by LED bulbs is directed, meaning that it may be focused in a particular direction, so minimizing the problem of distracting or spilling light.
6. No 'warm-up' time required
Typically, metal halide lights must be activated a half-hour before the start of night play on a full-sized athletic field. During this period, the lights have not yet achieved maximum brightness, but the energy used during the "warm up" period will still be charged to your electric account. Unlike LED lights, this is not the case. LED lights attain maximum illumination immediately upon activation, and LEDs do not need a "cool down" time after usage.
7. Refitting is easy
Many LED lights, like our MK LED light fittings, use the same architecture as conventional metal halide lamps. Therefore, the transition to LED lighting is very painless and unobtrusive. In fact, the Next Generation crew completes the majority of retrofit tasks in less than a day.
Switching from metal halide lighting to LED lighting is a reasonably simple operation that will save you money and improve the lighting quality of your tennis courts over the long run. Not only are the resulting lights brighter, but they also last longer, save energy, and need less maintenance. What is not to admire? There are other excellent LED solutions on the market, but if you're looking for an LED light fixture designed with the particular requirements of tennis courts in mind, go no further than our MK LED lights. Inquire whether you like to adapt your existing lighting or add new lighting.
Leave a Reply
Want to join the discussion?
Feel free to contribute!