Table of Contents [hide]
Do you want to update the lights on the badminton court? Badminton court lighting trouble? After football, badminton is the second most popular sport. This contactless activity is suitable for all ages and skill levels. It is suitable for indoor and outdoor games.
Lighting is one of the most important components of a badminton court. The lighting of the badminton court is essential. Not only must it be bright enough to illuminate the space, but bright enough for spectators and athletes to see everything inside the stadium.
If the badminton court is poorly lit, it may be difficult for players and spectators to see what is going on. There are several aspects to consider when choosing the right lighting for the court.
This article contains suggestions for the lighting of badminton courts.
The first consideration must be the size of the badminton court. The court must have clear boundaries. The width of the pitch line must be 40 mm. The court line may be white, but other easily distinguishable shades such as yellow can also be used. In addition, there should be no obstructions within 12 meters above the field and 2 meters around the field.
When considering the lighting of the court, it must be remembered that badminton is usually played in the dark. The lighting above the pitch is crucial to the success of the game. The installation of adequate lighting will inspire confidence in the athletes.
If there is a reflective surface, the player cannot hit the ball accurately when looking at the ceiling or wall. In addition, natural light can be disruptive. To prevent this interference, it is recommended to install curtains. The walls of the badminton court must be dark.
There are two forms of lighting that can be integrated into the lighting design and environment: led high bay lights and led floodlights. Light levels should be between 400 and 500 lux. The lights, on the other hand, are placed parallel to the sideline.
When lighting the badminton court, attention must be paid to the standard lighting design. Indoor court lighting must mimic natural light. It should have a pure tone and proper brightness.
You must ensure that the lighting does not fluctuate. Must be stable and uninterrupted; There must be no stroboscopic effect. Make sure lighting does not cause glare. In addition, you must focus on the flight path. It is recommended to make sure there are no double shadows or tails. The air position must be accurate. Players must be able to play consistently and accurately in well-lit conditions. Lighting shall not cause visual fatigue or discomfort to athletes.
Since there is no single lighting design that fits all badminton courts, you must contact an expert to select a lighting scheme for badminton courts. You may have to consider specific factors, such as player level, investment, and other economic and technical factors. Lighting distribution should optimize lighting efficiency and light use.
If you are looking for the best sports lighting, MKLIGHTS is an excellent choice. Explore a variety of LED stadium lights to find the ideal lighting that meets your requirements.
Professional badminton courts are needed to play this sport. The court must contain all necessary badminton equipment. There is no doubt that lighting is as important as any other equipment.
It may be difficult to determine what constitutes good lighting. The following lighting standards can help you properly light your badminton court.
Good lighting, according to lighting standards, provides the appropriate brightness and light uniformity. In addition, the court lighting must be 3D-aware, glare-free, and the correct color. Because the game will be played at a professional level, the lighting must be clear for participants, fans and officials to see. It should make it simple to watch every move on the field. Lighting requirements should ensure adequate TV reception.
Depending on the lighting requirements, the clothing, the object, the color of the building, the state of the players, the size and shape of the players, and the atmosphere of the court can be easily discernible.
Also, you have to take into account glare. Glare is an eye condition that irritates the eyes and reduces visibility. This is due to insufficient brightness and light distribution. Extreme brightness is a problem for players because the human eye can't get used to it. When the lighting effect is not correct, it will be difficult for the player to determine where the ball will land.
To prevent glare, the Angle of light at the lowest point of the pitch must be greater than 45 degrees. Often, reflective surfaces produce glare indoors. It is recommended to add baffles and grilles to lighting to reduce glare.
In order to determine the lighting uniformity of a badminton court, the ratio between the maximum and minimum illuminance values must be evaluated. No matter the style of the badminton court, the lighting requirements are very strict.
If there is too much light in the field, the glare will increase. If there is not enough light, it will be difficult to see. Therefore, the lighting must be made even so that everyone can enjoy the game.
Light dispersion is another element that needs your attention. The light is evenly distributed and concentrated in the viewing and playing areas. You must remember that a player's movement is not limited to the ground. Therefore, vertical light should also be considered. Otherwise, it will have a negative impact on the player's abilities.
In the stadium, various types of lighting are used. However, gold halide lamps are most commonly used on badminton courts. The problem with these lights is that they have to be warmed up and use more energy. LED lights can be used to solve the problem of gold halogen bulbs.
Long ago, LED lights weren't considered the best way to light stadiums. Previously, 70 lm/W of light was enough to fully illuminate the pitch. Today, lighting requires more than 150 lm/W.
Another problem with old lighting is glare. Technological advances have enhanced lighting design to make light softer. In addition, the CRI of the lighting must be considered. The light must have a high CRI because it must accurately reflect the color of the object.
In addition, the color temperature must be considered. You need to select the color temperature based on the location.
The positioning of lighting requires careful planning. To install lighting in the stadium, you must hire a skilled lighting engineer. For example, in a stadium where amateur matches are played, lighting may be erected on the sides. There will be three or four vertical rows of lights on each side. Despite this, side lights are banned in professional matches. Overhead lighting is recommended for such events.
For more information on badminton lighting arrangements, contact the MKLIGHTS experts.
Badminton courts must have adequate lighting design. The lighting on the pitch has a direct impact on the players' performance.
For example, there are eight regular badminton courts with a height of 12 meters. Standard lighting design requires 1200 lux for television broadcasts. In this case, proper lighting will involve dividing the light into three rows. As a result, there are fewer lines, and the lighting is positioned so that the player is exposed to natural light. Lighting design will ensure that the lights have no effect on the player.
Chassis lights are divided into five lines. The lights are then laid out across more rows, providing more even lighting for the player.
Lumens and watts are also measured when determining the lumens required for motion lighting. It needs to measure the amount of electricity generated by the light source. For example, a 100-watt light bulb consumes 100 watts of electricity for every second it is on. The more watts, the higher the bill, because the more electricity is consumed.
We hope this tutorial will help you to properly illuminate your badminton court. LED badminton court lighting is ideal for lighting the area evenly. It will save money on energy bills because less energy is consumed. MKLIGHTS has a large selection of high-quality LED lights.
|1000w Sport Field Lights||150w led flood light fixtures||Flicker free 150w led flood lights|
|840w tennis court lighting project in Mexico||240w led flood light in Philippines||560w led projector light in Malaysia|
Leave a Reply
Want to join the discussion?
Feel free to contribute!